Vacon NX Series Applications Manual page 312

VACON · 312
727 RESPONSE TO UNDERVOLTAGE FAULT 234567 (2.7.5)
Use this parameter to enable the automatic reset after an undervoltage fault.
Table 180: Selections for parameter ID727
Selection
number
0 Fault stored in fault history
1 Fault not stored in fault history
For the undervoltage limits, see the product's User Manual.
728 4MA FAULT FREQUENCY REFERENCE 234567 (2.7.2)
Use this parameter to set the frequency reference of the motor after a 4 mA fault when the
response to the 4 mA fault is a warning.
If the value of parameter ID700 is set to 3 and the 4mA fault occurs then the frequency
reference to the motor is the value of this parameter.
730 INPUT PHASE SUPERVISION 234567 (2.7.4)
Use this parameter to select the supply phase configuration of the drive.
Table 181: Selections for parameter ID730
Selection
number
0 No response
1 Warning
Fault, stop mode after fault
2
according to ID506
Fault, stop mode after fault
3
always by coasting
The input phase supervision ensures that the input phases of the AC drive have an
approximately equal current.
731 AUTOMATIC RESTART 1 (2.20)
Use this parameter to enable the Automatic reset function.
9
Selection name
Selection name
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
PARAMETER DESCRIPTIONS
Description
Description