Vacon NX Series Applications Manual page 323

PARAMETER DESCRIPTIONS
Actual value
Wake up level
(par.
ID1018)
f
out
Sleep level
(par.
ID1016)
Start/Stop status of
the var. speed drive
Fig. 81: AC drive sleep function
1019 WAKE-UP FUNCTION 57 (2.1.18)
Use this parameter to select the operation for the wake up level parameter.
This parameter defines whether the restoration of the Run state occurs when the actual
value signal falls below or exceeds the Wake-up level (parameter ID1018). See Chapter 1018
Wake-up level 57 (2.1.17) and Table 192.
The application 5 has selections 0-1 and application 7 selections 0-3 available.
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
t < par. ID1017 t ≥ par. ID1017
running
stop
VACON · 323
t
t
9