Vacon NX Series Applications Manual page 218

VACON · 218 PARAMETER DESCRIPTIONS
134 PRESET SPEED 9 4 (2.1.23)
Use this parameter to set the preset speed reference when the preset speed function is
used.
135 PRESET SPEED 10 4 (2.1.24)
Use this parameter to set the preset speed reference when the preset speed function is
used.
136 PRESET SPEED 11 4 (2.1.25)
Use this parameter to set the preset speed reference when the preset speed function is
used.
137 PRESET SPEED 12 4 (2.1.26)
Use this parameter to set the preset speed reference when the preset speed function is
used.
138 PRESET SPEED 13 4 (2.1.27)
Use this parameter to set the preset speed reference when the preset speed function is
used.
139 PRESET SPEED 14 4 (2.1.28)
Use this parameter to set the preset speed reference when the preset speed function is
used.
140 PRESET SPEED 15 4 (2.1.29)
Use this parameter to set the preset speed reference when the preset speed function is
used.
To use these preset speeds in the Multi-Step Speed Application (ASFIFF04), parameter ID301
must be given the value 13. In Multi-Step Speed Application (Application 4), digital inputs
DIN4, DIN5 and DIN6 are assigned to Preset Speed functions. The combinations of these
activated inputs select the preset speed reference.
9
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/