Vacon NX Series Applications Manual page 336

VACON · 336
Table 197: Selections for parameter ID1081
Selection
number
0 Analogue input 1 (AI1)
1 Anlogue input 2 (AI2)
2 AI1+AI2
3 AI1–AI2
4 AI2–AI1
5 AI1*AI2
6 AI1 joystick
7 AI2 joystick
8 Keypad reference (R3.2)
9 Fieldbus reference
Potentiometer reference; con-
trolled with ID418
10
(TRUE=increase) and ID417
(TRUE=decrease)
11 AI1 or AI2, whichever is lower
12 AI1 or AI2, whichever is greater
Max. frequency ID102 (recom-
13
mended in torque control only)
14 AI1/AI2 selection
15 Encoder 1 (AI input C.1)
Encoder 2 (With OPTA7 Speed
16 Synchronization, NXP only AI
input C.3)
17 Master Reference
18 Master Ramp Out (default)
1082 SYSTEMBUS COMMUNICATION FAULT RESPONSE 6 (2.7.30)
Use this parameter to select the response of the drive to an 'SystemBus communication'.
9
Function
See ID377
See ID388
See ID422
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
PARAMETER DESCRIPTIONS
Description