Vacon NX Series Applications Manual page 263

PARAMETER DESCRIPTIONS
Frequency reference
Reference
scaling max
ID304 = 70 Hz
f ID102
max
= 50 Hz
f ID101 =
min
Ref. scaling min
ID303 = 0 Hz
Fig. 59: Example of sleep limit function
Frequency reference
Reference
scaling max
ID304 = 70 Hz
f ID102
max
= 50 Hz
f ID101 =
min
Ref. scaling min
ID303 = 0 Hz
Fig. 60: Joystick hysteresis with minimum frequency at 35Hz
386 AI1 SLEEP DELAY 6 (2.2.2.10)
Use this parameter to set the time the analogue input signal must stay under the sleep limit
before the AC drive stops.
This parameter defines the time the analogue input signal has to stay under the sleep limit
determined with parameter ID385 in order to stop the AC drive.
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Hz
REVERSE
FORWARD
50%
A
START STOP
STOP START
Par. ID321
= 20%
Sleep limit
ID385=7%
Joystick hysteresis,
ID384 = 20%
Hz
REVERSE FORWARD
50%
A
ID321
= 20%
Joystick hysteresis,
ID384 = 20%
50%
B
From reverse to forward
From forward to reverse
AI (V/mA)
(0-10V/20mA)
Par. ID322
= 90%
50%
B
From reverse to forward
From forward to reverse
AI (V/mA)
(0-10V/20mA)
ID322
= 90%
VACON · 263
9