Vacon NX Series Applications Manual page 308

VACON · 308
Fig. 77: The Underload time counter function
717 AUTOMATIC RESTART: WAIT TIME 234567 (2.8.1)
Use this parameter to set the wait time before the first reset is done.
718 AUTOMATIC RESTART: TRIAL TIME 234567 (2.8.2)
Use this parameter to set the trial time for the automatic reset function.
During the trial time, the automatic reset function tries to reset the faults that occur. If the
number of faults during the trial time exceed the value of the respective parameter set with
ID720 to ID725 a permanent fault is generated.
9
Underload time counter
Trip area
ID716
Underload•
No underl.
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
PARAMETER DESCRIPTIONS
Trip/warning
ID713
Time