Vacon NX Series Applications Manual page 245

PARAMETER DESCRIPTIONS
Table 129: Selections for parameter IDs 334 and 335
Selection
Selection name
number
0 Not used
1 AI1
2 AI2
3 AI3
4 AI4
Fieldbus
5
Application 5
6 Motor torque
7 Motor speed
8 Motor current
9 Motor power
Encoder frequency (for Actual
10
value 1 only)
336 ACTUAL VALUE 1 MINIMUM SCALE 57 (2.2.11, 2.2.1.11)
Use this parameter to set the minimum scaling point of the actual value.
See Fig. 46 Examples of actual value signal scaling.
337 ACTUAL VALUE 1 MAXIMUM SCALE 57 (2.2.12, 2.2.1.12)
Use this parameter to set the maximum scaling point of the actual value.
See Fig. 46 Examples of actual value signal scaling.
338 ACTUAL VALUE 2 MINIMUM SCALE 57 (2.2.13, 2.2.1.13)
Use this parameter to set the minimum scaling point of the actual value.
Sets the minimum scaling point for Actual value 2. See Chapter 339 Actual value 2 maximum
scale 57 (2.2.14, 2.2.1.14).
339 ACTUAL VALUE 2 MAXIMUM SCALE 57 (2.2.14, 2.2.1.14)
Use this parameter to set the maximum scaling point of the actual value.
Sets the maximum scaling point for Actual value 2. See Fig. 46 Examples of actual value signal
scaling.
LOCAL CONTACTS: HTTP://DRIVES.DANFOSS.COM/DANFOSS-DRIVES/LOCAL-CONTACTS/
Description
(Actualvalue 1: FBProcessDataIN2; Actual value 2: FBPro-
cessDataIN3). See Chapter 9.7 Fieldbus control parameters
(IDs 850 to 859).
VACON · 245
9