AT&T 3B2/300 Technical Reference Manual page 499

FUNCTIONAL D E S C R I P T I O N - - - - - - - - - - - - - - - - - - - - - - - - - -
Local RAM
The CMl 95W Card contains 128K bytes of Dynamic Random Access Memory (DRAM) configured
as 64K by 16 bits.
Local ROM
The CM195W Card firmware is in 32K bytes of ROM configured as 16K by 16 bits.
CM 195W Equipped Device Table Data
The following table shows the Equipped Device Table (EDT) data for a CMl 95W Card. A value of
O means NO; a value of 1 means YES. The indirect device (indir_dev) is only applicable to systems
equipped with Small Computer System Interface (SCSI). The request queue size (rq_size) and the
completion queue size (cq_size) are SCSI software defined values. As such, the rq_size and cq_size
values may differ between versions of SCSI software.
EDT ITEM DATA
IDENTIFICATION CODE (ID_code) Ox 0100
DEVICE NAME (dev_name) SCSI
REQUEST QUEUE SIZE (rq_size) Ox 56
COMPLETION QUEUE SIZE (cq_size)
Ox 56
BOOT DEVICE (booLdev) 0
WORD SIZE (worcLsize) 1
BOARD SIZE (brcLsize) 0
SMART BOARD (smrLbrd) 1
CONSOLE CAPABILITY (cons_cap) 0
CONSOLE FILE (cons_file)
0
INDIRECT DEVICE (indir_dev) 1
3-246 TECHNICAL REFERENCE MANUAL