AT&T 3B2/300 Technical Reference Manual page 208

EQUIPMENT D E S C R I P T I O N - - - - - - - - - - - - - - - - - - - - - - - - - - -
Cartridge Tape Partitioning
The following table defines the partition, use, size, and number of blocks for the various controller
(c), drive (d), and section (s) identifiers for the 23-megabyte cartridge tape. These identifiers are
applicable to both the raw and block devices. Note that Volume Table of Contents (VTOC) partitioning
is fixed for the cartridge tape by the tape formatting process. The controller number (?) depends on the
slot in which the CMl 95H Card is equipped.
23-MEGABYTE CARTRIDGE TAPE DRIVE
(31 Blocks/Cylinder, Gap~l)
CARTRIDGE TAPE DEFAULT PARTITIONING
SECTOR
PARTITION USE START SIZE*
c?dOsO
root 5272 8928
c?dOsl
swap
126 5146
c?d0s2 usr 14200 31341
c?d0s3 usr 2 45539
c?d0s6 entire tape 0 45541
c?d0s7 boot 0 126
• Size is reported in 512-byte blocks.
2-184 TECHNICAL REFERENCE MANUAL