Delay Timer; Overfill Fault Timer - Nordson Mesa Fulfill Customer Product Manual

A-4
RetroFit Refill System with Nordson Level Sensor
Unit Features(contd)
Siren
Part 1121938_02
The picture shows the major components of the RetroFit control box.
Figure A‐2 Control box

Delay Timer

The delay timer determines how long the Refill board waits when the sensor
calls for adhesive before the vacuum system is activated. The delay timer
potentiometer is adjustable from 1 to 60 seconds.

Overfill Fault Timer

The overfill fault timer determines how long the vacuum system is operated
while trying to fill the unit. If the level sensor is not satisfied before the overfill
fault timer expires, an overfill fault is generated. The overfill fault timer
potentiometer is adjustable from 5 to 300 seconds.
24VDC power supply
Refill PCA
E 2013 Nordson Corporation