Viewing The Event Log - Nordson ProBlue Flex Manual

Viewing the Event Log

Event Log
E 2020 Nordson Corporation
Use the Event Log for troubleshooting purposes. The Event Log keeps track
of all melter events, including the time, day, type of an event, such as an
Alert, Fault and Stop conditions, and parameter changes. The Event Log also
tracks all system-level events that do not necessarily cause a pop-up
message to appear.
S
From the Home screen, select Event Log and
NOTES:
S
You can access the Event Log by pressing the
to clear and reset any zone Alert or Fault conditions.
S
You can also access the Event Log from the Alert, Fault, or Stop pop-up
message by selecting the
pad to open the Event Log.
S
You can only view 50 of the most current events on the screen. If you
want to view more or previous events, you must export the event log to a
USB and view the event log on your PC. Go to Tools | Reports/Logs to
export the Event Log to a USB so you can send it to Nordson Technical
support.
S
When transferring files between the melter and BBconn Cloud, the USB
drive must be formatted using FAT or FAT32. No other format, such as
NTFS and exFAT are supported.
OLED User Interface
ü
on the Navigation pad.
on the OLED panel
ü
icon, then press on the Navigation
Part 1128351_02
43