Using The Bios Configuration (Rbsu) Utility; About Ilo Configuration - HPE ProLiant User Manual

Using the BIOS Configuration (RBSU) utility

Using the BIOS Configuration (RBSU) utility
About this task About this task
The BIOS configuration page allows you to change some system configurations from Intelligent Provisioning. The options available differ
based on the system components. For a description of RBSU options, see the UEFI System Utilities User Guide for HPE ProLiant Gen11
Servers and HPE Synergy posted at https://www.hpe.com/support/UEFIGen11-UG-en
For example, you can update:
Workload profiles
Boot options
Storage options
Network options
Virtualization options
System Options
Memory Options
Server Security
NOTE: NOTE:
If a lock icon is shown next to a BIOS option, it means you cannot change that option. The option might be restricted to the
F9 screen, or you might have to change another setting, for example the Workload Profile.
Procedure Procedure
1. Select BIOS configuration (RBSU) from the maintenance options. The BIOS configuration (RBSU) screen displays the following
information:
ROM version
If a pending update follows valid RBSU dependency rules
Number of pending changes
Number of items changes automatically due to dependency rules
Resetting the BIOS
Workload profile
2. To reset the BIOS for this server, click Reset BIOS drop-down menu.
3. To update the workload profile, click to open Workload Profile drop-down menu.
4. To change RBSU configurations, select from the menu on the left, and then select the section that contains the configuration you want
to change.
5. To save changes, click Update.
6. To return to the Perform Maintenance home screen, click the Previous left arrow.

About iLO Configuration

About iLO Configuration
The iLO Configuration page allows you to change some iLO configurations from the Intelligent Provisioning. For a description on iLO
configuration, see https://www.hpe.com/info/ilo/docs https://www.hpe.com/info/ilo/docs. Intelligent Provisioning provides the following options to configure the iLO:
https://www.hpe.com/support/UEFIGen11-UG-en .
Intelligent Provisioning 4.20 User Guide for HPE ProLiant and Synergy Gen11 Servers 34