Using The Hpe C-Class Blade Suv Cable; Disconnecting And Replacing The Suv Cable; Connecting Locally To A Server Blade With Video And Usb Devices - HPE ProLiant BL460c Gen10 Maintenance And Service Manual

Using the HPE c-Class Blade SUV Cable

The c-Class Blade SUV Cable enables the user to perform server blade administration, configuration, and diagnostic
procedures by connecting video and USB devices directly to the server blade. For SUV cable connectors, see "SUV cable
connectors."

Disconnecting and replacing the SUV cable

CAUTION: Before disconnecting the SUV cable from the connector, always squeeze the release buttons on the
sides of the connector. Failure to do so can result in damage to the equipment.
Procedure
1. Disconnect the SUV cable from the server blade.
a. Press and hold both sides of the connector.
b. Disconnect the cable from the server blade.
To replace the component, reverse the removal procedure.

Connecting locally to a server blade with video and USB devices

Use the SUV cable to connect a monitor and any of the following USB devices:
• USB hub
• USB keyboard
• USB mouse
• USB CD/DVD-ROM drive
The USB connectors on the SUV cable do not support devices that require greater than a 500mA power source.
Numerous configurations are possible. This section offers two possible configurations. For more information, see USB
support.
105
Cabling