Hmi Base Module - IDEC FC4A-C10R2 User Manual

2: M S
ODULE PECIFICATIONS

HMI Base Module

The HMI base module is used to install the HMI module when using the slim type CPU module. The HMI base module
also has a port 2 connector to attach an optional RS232C or RS485 communication adapter.
When using the all-in-one type CPU module, the HMI base module is not needed to install the HMI module.
HMI Base Module Type Number
Module Name
HMI Base Module
Parts Description
(1) HMI Connector
(3) Port 2 Connector
(1) HMI Connector
(2) Hinged Lid
(3) Port 2 Connector
(4) Communication Connector
2-60
Type No.
FC4A-HPH1
(2) Hinged Lid
For installing the HMI module.
Open the lid to gain access to the port 2 connector.
For installing an optional RS232C or RS485 communication adapter.
Connects to the slim type CPU module.
« FC4A M S U ' M
ICRO MART SER S ANUAL
(4) Communication Connector
»