Simple Operation - IDEC FC4A-C10R2 User Manual

Simple Operation

This section describes how to edit a simple program using
puter to the
MicroSmart
Connect the
MicroSmart
Sample User Program
Create a simple program using
When only input I0 is turned on, output Q0 is turned on.
When only input I1 is turned on, output Q1 is turned on.
When both inputs I0 and I1 are turned on, output Q2 flashes in 1-sec increments.
Rung No.
1
2
3
Start WindLDR
From the Start menu of Windows, select Programs > WindLDR > WindLDR.
starts and a blank ladder editing screen appears with menus and tool bars shown on top of the screen.
WindLDR
Disable Tag Function
The following example describes a simple procedure without using the tag function.
From the menu bar, select Configure > Ladder Preference. The Ladder Preference dialog box appears, then
WindLDR
uncheck the check box under Tag to disuse the tag function. Click OK to close the dialog box.
, run the program, and monitor the operation on the
to the computer as described on page 4-1.
WindLDR . The sample program performs the following operation:
Input I0 Input I1
ON OFF
OFF ON
ON ON
« FC4A M
on a computer, transfer the program from the com-
WindLDR
Output Operation
Output Q0 is turned ON.
Output Q1 is turned ON.
Output Q2 flashes in 1-sec increments.
S U ' M
ICRO MART SER S ANUAL
4: O
screen.
WindLDR
»
B
PERATION ASICS
4-5