IDEC FC4A-C10R2 User Manual page 456

28: AS-I M
NTERFACE
LED Indicators
The LED indicators on the AS-Interface master module consist of status LEDs, I/O LEDs, and address LEDs.
LED Indicators
PWR
(AS-Interface power supply)
FLT (Fault)
LMO (Local mode)
Status LEDs
CMO (Connected mode)
OFF (Offline)
CNF (Configuration)
Input LEDs IN0-IN3
Output LEDs OUT0-OUT3
0x-3x (place of 10)
Address LEDs x0-x9 (place of 1)
A, B
28-16
C
ASTER OMMUNICATION
Status LEDs
Input LEDs
Output LEDs
Indicates the status of the AS-Interface power supply for the AS-Interface
master module.
Goes on when the AS-Interface power is supplied sufficiently.
Indicates the AS-Interface configuration status.
Goes on when the permanent configuration data (PCD) stored in the AS-
Interface master module EEPROM does not match the current slave con-
figuration, or configuration data image (CDI). Then, configuration is not
complete or an error was found on the AS-Interface bus.
Indicates the mode of the AS-Interface master module.
Goes on when the AS-Interface master module is in local mode.
Goes off when the AS-Interface master module is in connected mode.
Indicates the mode of the AS-Interface master module.
Goes on when the AS-Interface master module is in connected mode.
Goes off when the AS-Interface master module is in local mode.
Indicates the operating status of the AS-Interface master module.
Goes on when the AS-Interface master module is in normal protected
offline.
Indicates the configuration status of the AS-Interface master module.
Flashes when the AS-Interface master module is in configuration mode.
Indicates the operating status of four inputs at the address indicated by
the address LEDs.
Goes on when the corresponding input at the indicated address is on.
Indicates the operating status of four outputs at the address indicated by
the address LEDs.
Goes on when the corresponding output at the indicated address is on.
Indicates the slave address of 0A through 31B.
Goes on when the selected address exists.
(A or B slave) Flashes when the selected address does not exist.
« FC4A M S U ' M
ICRO MART SER S ANUAL
Address LEDs (0x to 3x)
Address LEDs (x0 to x9)
Address LEDs (A and B)
Description
»