Shock-resistant metal slide handle actuators ensure a safe work environment Slide handle actuators are user-friendly accessories for HS1T interlock switches. The slide handle actuator supports 4-way operation (left/right door, sliding door/opening door) and prevents workers from being con ned in hazardous areas, creating a safe work environment. UnLock Interlock Switch Interlock Switch...
Page 3
UnLock Emergency escape from inside hazardous areas Rear unlocking button kit Rear unlocking button kit (HS9Z-FL5: optional) (HS9Z-FL5: optional) Rear lever Rear unlocking button Push the rear unlocking button Open the door and escape. to release the lock and stop the Slide the lever.
Page 4
*1) Must be purchased when using a HS1T rear unlocking button model (sold separately) *2) Mounting part refers to a part where the product will be attached (such as a frame). • Items in [ ] are not for standard sale. To order, contact IDEC. • For other panel thickness, contact IDEC.
30≤Y≤35 PA6 (black) HS9Z-FL55 35<Y≤45 [HS9Z-FL56] 45<Y≤55 [HS9Z-FL57] 55<Y≤65 Part No. in [ ] are not for standard sale. To order, contact IDEC. Material: ST37 zinc coated HS1T-44ZLSM- (Side conduit model) Material: ST37 zinc coated Material: ST37 zinc coated ...
Do not install in any other before operation. direction. ケーブル Instructions For details on mounting, wiring, and circuit examples, see the instruction manual from the below URL. URL: https://product.idec.com/?product=HS9Z-EH Padlock hole Recommended Tightening Torque • Install the padlock or hasp on Padlock hole Recommended Screw...
IDEC product fails Furthermore, the warranty described here refers to a warranty on the IDEC product as a unit, and damages induced by the failure of an IDEC product are iii. Wiring and installation that ensures the IDEC product used in your excluded from this warranty.