IDEC FC4A-C10R2 User Manual page 402

24: A I/O C
NALOG ONTROL
Status Code
0 Normal operation
1 (reserved)
2 Initializing
3 Invalid parameter or analog output channel not available on the installed analog module
4 Hardware failure (external power supply failure)
Ladder Refresh Type
The operating status of each analog output channel is stored to a data register determined by the data register number
selected in the Configure Parameters dialog box of the ANST macro.
Operating Status Bit
0
Bit 0
1
0
Bit 1
1
0
Bit 2
1
0
Bit 3
1
Bit 4 to Bit 15 0
24-16
Analog Output Operating Status (END refresh type)
Analog Output Operating Status (Ladder refresh type)
Operating status bit
Parameter bit
External power supply bit
Output data error bit
Reserved
« FC4A M
ICRO
Normal operation
Initializing, changing configuration, hardware initialization error
Parameter configuration normal
Parameter configuration error
External power supply normal
External power supply error
Output data normal
Output data range error
Normal operation
S U ' M »
MART SER S ANUAL