Stop Input And Reset Input - IDEC FC4A-C10R2 User Manual

Fc4a series microsmart micro programmable logic controller

Table of Contents

Stop Input and Reset Input

As described on page 4-3, the

nated from the Function Area Settings menu. When the designated stop or reset input is turned on, the

operation. For the system statuses in the stop and reset modes, see page 4-4.

Since these settings relate to the user program, the user program must be downloaded to the

any of these settings.

Programming WindLDR

2. Select the Run/Stop tab.

Click the check box on the left of Use Stop Input and type a desired input number available on the CPU

module in the Stop Input ﬁeld.

Reset Input:

Click the check box on the left of Use Reset Input and type a desired reset number available on the CPU

module in the Reset Input ﬁeld.

This example designates

input I0 as a stop input and

input I1 as a reset input.

No stop and reset inputs are designated.

3. Click the OK button.

can be started and stopped using a stop input or reset input, which can be desig-

menu bar, select Conﬁgure > Function Area Settings. The Function Area Settings dialog box

after changing

Show Quick Links

Table of Contents