Terminal Connection - IDEC FC4A-C10R2 User Manual

3: I
NSTALLATION AND

Terminal Connection

• Make sure that the operating conditions and environments are within the specification values.
Caution
• Be sure to connect the grounding wire to a proper ground, otherwise electrical shocks may be
caused.
• Do not touch live terminals, otherwise electrical shocks may be caused.
• Do not touch terminals immediately after power is turned off, otherwise electrical shocks may be
caused.
• When using ferrules, insert a wire to the bottom of the ferrule and crimp the ferrule.
• When connecting a stranded wire or multiple solid wires to a screw terminal block, use a ferrule.
Otherwise the wire may slip off the screw terminal block.
Ferrules, Crimping Tool, and Screwdriver for Phoenix Terminal Blocks
The screw terminal block can be wired with or without using ferrules on the end of cable. Applicable ferrules for the Phoe-
nix terminal blocks and crimping tool for the ferrules are listed below. The screwdriver is used for tightening the screw ter-
minals on the
MicroSmart
available from Phoenix Contact.
Type numbers of the ferrules, crimping tool, and screwdriver listed below are the type numbers of Phoenix Contact. When
ordering these products from Phoenix Contact, specify the Order No. and quantity listed below.
Ferrule Order No.
Quantity of Cables
For 1-cable connection
For 2-cable connection
Crimping Tool and Screwdriver Order No.
Tool Name
Crimping Tool
For CPU modules
Screwdriver
For I/O modules and
communication adapter
Screw Terminal Tightening Torque
3-18
W
IRING
modules. These ferrules, crimping tool, and screwdriver are made by Phoenix Contact and are
Cable Size
UL1007 AWG16 AI 1,5-8 BK
UL1007 AWG18 AI 1-8 RD
UL1015 AWG22 AI 0,5-8 WH
UL1007 AWG18 AI-TWIN 2 x 0,75-8 GY
UL1015 AWG22 AI-TWIN 2 x 0,5-8 WH
CRIMPFOX ZA 3
SZS 0,6 x 3,5
SZS 0,4 x 2,5
CPU modules
I/O modules
Communication adapter
« FC4A M
Phoenix Type Order No.
32 00 04 3
32 00 03 0
32 00 01 4
32 00 80 7
32 00 93 3
Phoenix Type Order No.
12 01 88 2
12 05 05 3
12 05 03 7
S U ' M
ICRO MART SER S ANUAL
Pcs./Pkt.
100
100
100
100
100
Pcs./Pkt.
1
10
10
0.5 N·m
0.22 to 0.25 N·m
»