IDEC FC4A-C10R2 User Manual page 292

17: U C
SER OMMUNICATION
6. Once again in the Data Type Selection dialog box, click Constant (Hexadecimal) and click OK. Next, in the Constant
(Hexadecimal) dialog box, type 03 to program the end delimiter ETX (03h). When finished, click OK.
7. In the Transmit instruction dialog box, type M10 in the destination D1 box and type D100 in the destination D2 box.
When finished, click OK.
Programming of the TXD1 instruction is complete and the transmit data is specified as follows:
STX "1" "2"
(02h) (31h) (32h)
Constant
(hex)
17-14
I
NSTRUCTIONS
BCC calculation range
"3" "4" "5" "6"
(33h) (34h) (35h) (36h)
D10 D11
« FC4A M
BCC BCC
"7" "8" ETX
(H) (L)
(37h) (38h) (03h)
(41h) (36h)
BCC Constant
(hex)
S U ' M
ICRO MART SER S ANUAL
»