Operand Allocation Numbers For End Refresh Type Analog I/O Modules; Operand Allocation Numbers For As-Interface Master Module 1 - IDEC FC4A-C10R2 User Manual

Fc4a series microsmart micro programmable logic controller

Table of Contents

Operand Allocation Numbers for END Refresh Type Analog I/O Modules

Analog I/O Module Number

Note: Each analog I/O module uses 20 data registers. When analog modules are not connected, the corresponding data

registers can be used as ordinary data registers.

Operand Allocation Numbers for AS-Interface Master Module

MicroSmart CPU Module

AS-Interface Internal Relays

AS-Interface Data Registers

Note: AS-Interface master module uses internal relays and data registers shown above. When AS-Interface master module

is not connected, these internal relays and data registers can be used as ordinary internal relays and data registers.

Analog Input Channel 0

Allocation No.

Analog Input Channel 1

AS-Interface Master Module EEPROM

AS-Interface Object

Digital input (IDI)

Digital output (ODI)

Status information

Analog input

Analog output

List of active slaves (LAS)

List of detected slaves (LDS)

List of peripheral fault slaves (LPF)

List of projected slaves (LPS)

Conﬁguration data image A (CDI)

Conﬁguration data image B (CDI)

Permanent conﬁguration data A (PCD)

Permanent conﬁguration data B (PCD)

Parameter image (PI)

Permanent parameter (PP)

Slave 0 ID1 code

For ASI command description

Analog Output

— Reserved —

Show Quick Links

Table of Contents