Jam Code (Adf-Related) - Canon imageRUNNER 5065 series Service Manual

Code jam
17C1 document registration sensor stationary jam
17C2 reversing inlet sensor stationary jam
17C3 reversing sensor stationary jam
17C4 reversing timing sensor stationary jam
17C5 deacceleration timing sensor delay jam
17C6 separation timing sensor stationary jam
17C7 folding position accuracy sensor stationary jam
17C8 upper stopper assembly path sensor stationary jam
17C9 delivery 1 sensor stationary jam
17CA delivery 2 sensor stationary jam
17CB 3-fold tray empty sensor stationary jam
17D1 inserter paper absent jam
17D7 inserter power on jam
17D8 inserter door open jam

16.4.3 Jam Code (ADF-related)

iR5065 / iR 5055 / iR5075 / / /
Code
0001 post-separation sensor PCB
0002 post-separation sensor PCB
0003 registration sensor
0004 registration sensor
0005 read sensor PCB
0006 read sensor PCB
0007 delivery reversal sensor PCB
0008 delivery reversal sensor PCB
0009 No.2 registration sensor
0010 No.2 registration sensor
0011 No.2 read sensor
0012 No.2 read sensor
0042 post-separation sensor PCB
0043 registration sensor
0044 registration sensor
0045 read sensor
0046 read sensor
0047 delivery reversal sensor PCB
0048 delivery reversal sensor PCB
0049 No.2 registration sensor
0050 No.2 registration sensor
0051 No.2 read sensor
0052 No.2 read sensor
0071 TIMING NG
0073 TIMING NG
0090 ADF open/closed sensor 1
0091 ADF open/closed sensor 1
0092 DF cover open/closed sensor
0093 DF cover open/closed sensor
Sensor Notation
PCB2
PCB2
PI1
PI1
PCB3
PCB3
PCB4
PCB4
PI12
PI12
PI11
PI11
PCB2
PI1, PI12
PI1, PI12
PCB3, PI11
PCB3, PI11
PCB4
PCB4
PI12
PI12
PI11
PI11
-
-
PS502
PS502
PI6
PI6
T-16-11
The post-separation sensor does not detect paper when paper has been moved 452 mm after the
start of separation.
- The separation sensor detects paper when paper has been moved 500 mm (if extra-length, +200
mm) -45.5 mm after registration pickup.
- the sensor goes on (paper with hole) before paper has been fed 12 mm after the detection of the
trailing edge; the separation sensor detects paper after paper has been fed 50 mm from when the
separation senor has gone on.
The registration sensor does not detect paper a feed length of 134.8 mm after the post-separation
sensor has gone on.
The read sensor goes off before the registration sensor goes off.
- The read sensor does not detect paper a feed length of 364.2 mm (182.1 x 2) from the point of
registration.
- The read sensor does not detect paper a feed length of 157.4 mm (78.7 x 2) from the point of
No. 2 registration.
- The read sensor detects paper a feed length of 500 mm (if extra-length, +200 mm) after the start
of feed, resumed after a temporary stop for reading.
- At time of LTRR/LGL identification in mix mode, the read sensor detects paper a feed length
of 514 mm after the start of feed from the edging wait point.
If not in high-speed duplexing mode, the delivery sensor does not detect paper when paper is
moved 132.1 mm after it has reached the leading edge lower stream roller with reference to the
activation of the read sensor.
The delivery sensor detects paper a feed length of 161.9 mm after the trailing edge read end point.
-When feeding 4 times the distance between the No.1 registration roller and the No.2 registration
sensor after re-pickup from the No.1 registration roller in the simplex pickup from the tray, the
No.2 registration sensor does not turn on. (82.2 X 4)mm
-When feeding 4 times the distance between the reversal roller + 20 mm and the No.2 registration
sensor in the reversal duplexing pickup from the reversal duplexing path, the No.2 registration
sensor does not turn on. (22.6 X 4)mm
The No.2 registration sensor detects papers when feeding the length of 500 X 2 mm after the No.2
registration sensor turned on.
The No.2 read sensor does not turn on when feeding twice the distance between the read position
and the No.2 read sensor after the start of reading a document. (47.4 X 2)mm
The read sensor detects papers after feeding the length of 500 mm (+200 mm for the long one)
in the detection of the No.2 read sensor
1st sheet, post-separation sensor, stationary
1st sheet, registration sensor, non arrival
1st sheet, registration sensor, stationary
1st sheet, read sensor, non arrival
1st sheet, read sensor, stationary
1st sheet, delivery sensor, non arrival
1st sheet, delivery sensor, stationary
1st sheet, No.2 registration sensor, non arrival
1st sheet, No.2 registration sensor, stationary
1st sheet, No.2 read sensor, non arrival
1st sheet, No.2 read sensor, stationary
fault in software timing
fault in shift motor
The ADF has been opened while in operation.
The ADF has been opened while in operating (paper wait).
The cover has been opened while in operation (drive system in operation).
The cover has been opened while in operation (paper wait).
Description
Chapter 16
0015-5644
16-17