Setup Menu: Features/Functions Configuration; Setup>Data Logging (Data Acquisition System, Das); Figure 2-39. Datalog Configuration, New Log Page; Figure 2-40. Datalog Configuration, Existing Log - Teledyne T200 User Manual

SETUP MENU: FEATURES/FUNCTIONS CONFIGURATION

Use the Setup menu to configure the instrument's software features, to gather information
on the instrument's performance, and to configure and access data from the Datalogger,
the instrument's internal data acquisition system (DAS). Once the setups are complete, the
saved configurations can be downloaded to a USB drive through the Utilities>USB
Utilities menu and uploaded to other instruments of the same model (Section 2.6).
S >D L (D A S , DAS)
ETUP ATA OGGING ATA CQUISITION YSTEM
The Datalogger can be configured to capture and store user-defined data, which then can
be viewed in the Alerts page, if elected, as well as downloaded from the instrument to a
USB flash drive or using NumaView™ Remote software for examination and analysis.
Figure 2-39 shows a new log; Figure 2-40 shows a sample existing log, which can be edited
or deleted, and Figure 2-41 provides illustrated instructions for setting up a new log, with
Sections 2.5.1.1 and 2.5.1.2 providing additional details.
To transfer captured instrument data to a flash drive see Section 2.5.1.3.

Figure 2-39. Datalog Configuration, New Log Page

Figure 2-40. Datalog Configuration, Existing Log

083730200A DCN7962 Teledyne API T200 NO/NO /NO Analyzer with NumaView™ Software 63
2 x