Configuring The Data Parameter Functions - Teledyne 300E Instruction Manual

Model 300E Carbon Monoxide Analyzer
Instruction Manual

6.11.5. Configuring the Data Parameter Functions

To configure the parameters for a specific Data Parameter, press:
FROM THEEDIT DATA PARAMETER MENU
SETUP C.3 0) PARAM=DETREP, MODE=INST
PREV NEXT
SETUP C.3 PARAMETERS: DETREF
SET> EDIT
SAMPLE MODE: INST
SETUP C.3
<SET SET> EDIT
PRECISION: 1
SETUP C.3
<SET SET>
SETUP C.3 STORE NUM. SAMPLES: OFF
<SET EDIT
P/N 04288 REV: A
EDIT
INS DEL EXIT
EXIT
SETUP C.3 PARAMETERS: DETREF
PREV NEXT
PREV & NEXT Cycle through list of
available Data Parameters.
CHANGING THE PARAMETER TYPE
DELETES ALL RECORDED DATA
EXIT
SETUP C.3 SAMPLE MODE: INST
INST AVG MIN MAX
EDIT
EXIT
SETUP C.3 PRECISION: 1
1
EXIT
SETUP C.3 STORE NUM. SAMPLES: OFF
OFF
ENTR EXIT
EXIT
Press the key for the desired Mode
EXIT
Toggle key to set for 0-9
ENTR EXIT
Toggle key to Turn ON/OFF
Operating Instructions
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
<SET Returns to
previous
Functions
115