Settings In The Local Stations - Mitsubishi Electric MELSEC iQ-R Series User Manual

Settings in the local stations

Connect the engineering tool to the CPU module on the local station and set parameters. Set the station number 1 and 2 to
the same setting.
1.
Set the CPU module and add a module label of the CPU module. The setting method of the CPU module and addition
method of the module label are the same as those of the master station. ( Page 74 Setting in the master station)
2.
Set the RJ71GN11-T2 as follows.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]
3.
Add the module labels of the RJ71GN11-T2. The addition method of the module label is the same as that of the master
station. ( Page 74 Setting in the master station)
8 COMMUNICATION EXAMPLES
8.1 RJ71GN11-T2 Communication Example
8
77