Lldp Port Configuration - Lenovo RackSwitch G8264CS Cli Command Reference

LLDP Port Configuration

© Copyright Lenovo 2017
Table 225.
LLDP Configuration Options (continued)
Command Syntax and Usage
no lldp transmission­delay
Resets the transmission delay interval to its default value of 2 seconds.
Command mode: Global configuration
lldp trap­notification­interval <1‐3600>
Configures the trap notification interval, in seconds.
The default value is 5 seconds.
Command mode: Global configuration
no lldp trap­notification­interval
Resets the trap notification interval to its default value of 5 seconds.
Command mode: Global configuration
show lldp [port [<port alias or number>]]
Display current LLDP configuration.
Command mode: All
Use the following commands to configure LLDP port options.
Table 226.
LLDP Port Options
Command Syntax and Usage
lldp admin­status {tx_only|rx_only|tx_rx}
Configures the LLDP transmission type for the port, as follows:
Transmit only

Receive only

Transmit and receive

The default setting is tx_rx.
Command mode: Interface port
no lldp admin­status
Disables the LLDP transmission type.
Command mode: Interface port
[no] lldp trap­notification
Enables or disables SNMP trap notification for LLDP messages.
Command mode: Interface port
show interface port <port alias or number> lldp
Display current LLDP port configuration.
Command mode: All
Chapter 4: Configuration Commands
433