How This Book Is Organized - Lenovo RackSwitch G8264CS Cli Command Reference

How This Book Is Organized
© Copyright Lenovo 2017
Chapter 1, "ISCLI Basics"
information and configuration commands. This chapter provides an overview of
the command syntax, including command modes, global commands and
shortcuts.
Chapter 2, "Information Commands"
parameters.
Chapter 3, "Statistics Commands"
Chapter 4, "Configuration Commands"
parameters, ports, VLANs, Spanning Tree Protocol, SNMP, Port Mirroring, IP
Routing, Link Aggregation and more.
Chapter 5, "Operations Commands", shows how to use commands which affect
switch performance immediately, but do not alter permanent switch
configurations (such as temporarily disabling ports). The commands describe how
to activate or deactivate optional software features.
Chapter 6, "Boot Options"
images, how to load a new software image and how to reset the software to factory
defaults.
Chapter 7, "Maintenance Commands"
critical switch state information, how to clear it and how to clear part or all of the
forwarding database.
Appendix A, "Lenovo N/OS System Log Messages"
messages.
Appendix B, "Getting help and technical assistance"
from Lenovo to assist you.
, displays Lenovo legal information.
Appendix C, "Notices"
Index " includes pointers to the description of the key words used throughout the
"
book.
, describes how to connect to the switch and access the
, shows how to view switch configuration
, shows how to view switch performance statistics.
, shows how to configure switch system
, describes the use of the primary and alternate switch
, shows how to generate and access a dump of
, shows a listing of syslog
, lists the resources available
Preface
17