Lenovo RackSwitch G8264CS Cli Command Reference page 396

IPv6 Metering Configuration
396
G8264CS Command Reference for ENOS 8.4
These commands define the Access Control profile for the selected ACL.
Table 201.
IPv6 Metering Options
Command Syntax and Usage
access­control list6 <1‐128> meter action {drop|pass}
Configures the ACL Meter to either drop or pass out‐of‐profile traffic.
Command mode: Global configuration
access­control list6 <1‐128> meter committed­rate <64‐10000000>
Configures the committed rate, in kilobits per second. The committed rate
must be a multiple of 64.
Command mode: Global configuration
[no] access­control list6 <1‐128> meter enable
Enables or disables ACL Metering.
Command mode: Global configuration
access­control list6 <1‐128> meter maximum­burst­size <32‐4096>
Configures the maximum burst size, in kilobits. Enter one of the following
values for mbsize: 32, 64, 128, 256, 512, 1024, 2048, 4096.
Command mode: Global configuration
default access­control list6 <1‐128> meter
Sets the ACL meter configuration to its default values.
Command mode: Global configuration
show access­control list6 <1‐128> meter
Displays current ACL Metering parameters.
Command mode: All