Port Wred Configuration - Lenovo RackSwitch G8264CS Cli Command Reference

Port WRED Configuration
370
G8264CS Command Reference for ENOS 8.4
These commands allow you to configure Weighted Random Early Detection
(WRED) parameters for a selected port. For global WRED configuration, see
"Weighted Random Early Detection Configuration" on page
Table 177.
Port WRED Options
Command Syntax and Usage
[no] random­detect enable
Enables or disables Random Detection and avoidance.
Command mode: Interface port
[no] random­detect ecn enable
Enables or disables Explicit Congestion Notification (ECN). When ECN is on,
the switch marks the ECN bit of the packet (if applicable) instead of dropping
the packet. ECN‐aware devices are notified of the congestion and those
devices can take corrective actions.
Note: ECN functions only on TCP traffic.
Command mode: Interface port
show interface port <port alias or number> random­detect
Displays current Random Detection and avoidance parameters.
Command mode: All
377.