VM Group Information
VM Bandwidth Information
VM Profile Information
160
G8264CS Command Reference for ENOS 8.4
The following command displays VM Group parameters:
show virt vmgroup [<1‐4096>]
Command mode: All
VM group 1 current configuration:
Current VM group's secure mode: Disabled
Current Group Ports: 13 17
Current Group vPorts: : empty
VLAN: 2
Tagging/Trunkmode: Disabled
Current GROUP VMAP Config is empty
The following command displays VM bandwidth management parameters:
show virt vmpolicy vmbwidth
Command mode: All
Bandwidth Profile for VM 00:50:56:a5:32:f7 is enabled.
TX:
Rate: 1024
Burst: 2048
ACL: 127
The following command displays VM Profile parameters:
show virt vmprofile
Command mode: All
VM profile "test30":
VLAN ID: 30
Traffic shaping not enabled.
VM Groups: 30