RMON Statistics
© Copyright Lenovo 2017
Use the following command to display the Remote Monitoring (RMON) statistics
of the selected port:
show interface port <port alias or number> rmoncounters
Command mode: All
RMON statistics for port 1:
etherStatsDropEvents: NA
etherStatsOctets: 538
etherStatsPkts: 4
etherStatsBroadcastPkts: 1
etherStatsMulticastPkts: 3
etherStatsCRCAlignErrors: 0
etherStatsUndersizePkts: 0
etherStatsOversizePkts: 0
etherStatsFragments: 0
etherStatsJabbers: 0
etherStatsCollisions: 0
etherStatsPkts64Octets: 3
etherStatsPkts65to127Octets: 0
etherStatsPkts128to255Octets: 0
etherStatsPkts256to511Octets: 1
etherStatsPkts512to1023Octets: 0
etherStatsPkts1024to1518Octets: 0
The following table describes the RMON statistics.
Table 94.
RMON Statistics of a Port
Statistics
etherStatsDropEvents
etherStatsOctets
etherStatsPkts
etherStatsBroadcastPkts
etherStatsMulticastPkts
Description
The total number of packets received that were
dropped because of system resource
constraints.
The total number of octets of data (including
those in bad packets) received on the network
(excluding framing bits but including FCS
octets).
The total number of packets (including bad
packets, broadcast packets, and multicast
packets) received.
The total number of good packets received that
were directed to the broadcast address.
The total number of good packets received that
were directed to a multicast address.
Chapter 3: Statistics Commands
209