Port Acl Configuration - Lenovo RackSwitch G8264CS Cli Command Reference

Port ACL Configuration
© Copyright Lenovo 2017
The following table describes the Port ACL commands.
Table 176.
Port ACL Configuration Options
Command Syntax and Usage
[no] access­control group <1‐256>
Adds or removes the specified ACL group to the port. You can add multiple
ACL groups to a port, but the total number of precedence levels allowed is
two.
Command mode: Interface port/Interface portchannel
[no] access­control list <1‐256>
Adds or removes the specified ACL to the port. You can add multiple ACLs to
a port, but the total number of precedence levels allowed is two.
Command mode: Interface port/Interface portchannel
[no] access­control list6 <1‐128>
Adds or removes the specified IPv6 ACL to the port. You can add multiple
ACLs to a port, but the total number of precedence levels allowed is two.
Command mode: Interface port
show interface port <port alias or number> access­control
Displays current ACL QoS parameters.
Command mode: All
Chapter 4: Configuration Commands
369