Lenovo RackSwitch G8264CS Cli Command Reference page 136

PIM Component Information
PIM Interface Information
136
G8264CS Command Reference for ENOS 8.4
The following command displays Protocol Independent Multicast (PIM)
component information:
show ip pim component [<component ID (1‐2)>]
Command mode: All
PIM Component Information
­­­­­­­­­­­­­­­­­­­­­­­­­­­
Component­Id: 1
PIM Mode: sparse, PIM Version: 2
Elected BSR: 0.0.0.0
Candidate RP Holdtime: 0
PIM component information includes the following:
Component ID

 Mode (sparse, dense)
 PIM Version
 Elected Bootstrap Router (BSR) address
 Candidate Rendezvous Point (RP) hold time, in seconds
The following command displays information about PIM interfaces:
show ip pim interface
Command mode: All
Address IfName/IfId Ver/Mode Nbr Qry DR­Address DR­Prio Count Interval
­­­­­­­­ ­­­­­­­­­­­ ­­­­­­­­ ­­­ ­­­ ­­­­­­­­­­ ­­­­­­­ ­­­­­­­­­­­­­­
40.0.0.3 net4/4 2/Sparse 1 30 40.0.0.3 1
50.0.0.3 net5/5 2/Sparse 0 30 50.0.0.3 1
PIM interface information includes the following for each PIM interface:
IP address

 Name and ID
 Version and mode
 Neighbor count
 Query interval
 Designated Router address
 Designated Router priority value