Lenovo RackSwitch G8264CS Cli Command Reference page 397

ACL Log Configuration
© Copyright Lenovo 2017
These commands allow you to define filtering criteria for each IPv6 Access Control
List (ACL) log.
Table 202.
ACL Log Configuration Options
Command Syntax and Usage
[no] access­control list <1‐256> log
Enables or disables Access Control List logging.
Command mode: Global configuration
[no] access­control list6 <1‐128> log
Enables or disables IPv6 Access Control List logging.
Command mode: Global configuration
access­control log interval <5‐600>
Sets the filter log displaying interval in seconds.
The default setting is 300 seconds.
Command mode: Global configuration
access­control log rate­limit <1‐1000>
Sets the filter log queue rate limit in packets per second (pps).
The default settings is 10 pps.
Command mode: Global configuration
default access­control log [interval|rate­limit]
Resets the specified filter log parameters to their default values.
Command mode: Global configuration
show access­control log
Displays the current ACL log parameters.
Command mode: All
Chapter 4: Configuration Commands
397