Interface Statistics
Statistics
ifInOctets
ifInUcastPkts
ifInBroadcastPkts
ifInMulticastPkts
ifInFlowControlPkts
ifInPriFlowControlPkts The total number of priority flow control pause packets
© Copyright Lenovo 2017
Use the following command to display the interface statistics of the selected port:
show interface port <port alias or number> interfacecounters
Command mode: All
Interface statistics for port 1:
ifHCIn Counters ifHCOut Counters
Octets: 51697080313 51721056808
UcastPkts: 65356399 65385714
BroadcastPkts: 0 6516
MulticastPkts: 0 0
FlowCtrlPkts: 0 0
PriFlowCtrlPkts: 0 0
Discards: 0 0
Errors: 0 21187
Ingress Discard reasons: Egress Discard reasons:
VLAN Discards: 0 HOLblocking Discards: 0
Filter Discards: 0 MMU Discards: 0
Policy Discards: 0 Cell Error Discards: 0
NonForwarding State: 0 MMU Aging Discards: 0
IBP/CBP Discards: 0 Other Discards: 0
The following table describes the interface statistics.
Table 91.
Interface Statistics of a Port
Description
The total number of octets received on the interface,
including framing characters.
The number of packets, delivered by this sub‐layer to a
higher sub‐ layer, which were not addressed to a
multicast or broadcast address at this sub‐layer.
The number of packets, delivered by this sub‐layer to a
higher sub‐ layer, which were addressed to a broadcast
address at this sub‐layer.
The total number of packets that higher‐level protocols
requested to be transmitted, and which were addressed
to a multicast address at this sub‐layer, including those
that were discarded or not sent. For a MAC layer
protocol, this includes both Group and Functional
addresses.
The total number of flow control pause packets
received on the interface.
received on the interface.
Chapter 3: Statistics Commands
205