Routing Information Protocol Configuration - Lenovo RackSwitch G8264CS Cli Command Reference

Routing Information Protocol Configuration
© Copyright Lenovo 2017
RIP commands are used for configuring Routing Information Protocol parameters.
This option is turned off by default.
Table 263.
Routing Information Protocol Options
Command Syntax and Usage
router rip
Enter Router RIP configuration mode.
Command mode: Global configuration
[no] enable
Globally enables or disables RIP.
Command mode: Router RIP
[no] redistribute {ebgp|eospf|fixed|ibgp|ospf|static}
Configures RIP route distribution. To view command options, see page
Command mode: Router RIP
timers update <1‐120>
Configures the time interval for sending for RIP table updates, in seconds.
The default value is 30 seconds.
Command mode: Router RIP
show ip rip
Displays the current RIP configuration.
Command mode: All
Chapter 4: Configuration Commands
484.
481