Lenovo RackSwitch G8264CS Cli Command Reference page 304

304
G8264CS Command Reference for ENOS 8.4
Table 141.
System Configuration Options (continued)
Command Syntax and Usage
system notice <maximum 2021 character multi‐line login notice> <ʹ.ʹ to end>
[addline <notice text>]
Displays a login notice immediately before the "Enter password:" prompt.
This notice can contain up to 2021 characters and new lines. The addline
option adds new lines of text to the existing login notice without replacing it.
Command mode: Global configuration
no system notice
Deletes the login notice.
Command mode: Global configuration
[no] system packet­logging
Enables or disables logging of packets that come to the CPU.
The default setting is enabled.
Command mode: Global configuration
[no] system reset­control
Enables or disables the reset control flag. When enabled, the switch continues
to function after a crash of the main processor, using the last known Layer 2/3
information.
The default setting is enabled.
Command mode: Global configuration
[no] system server­ports port <port alias or number>
Adds or removes the specified port to the list of server ports. For more details,
see page 358.
Command mode: Global configuration
[no] system service­led enable
Enables (on) or disables (off) the Service Required LED on the front panel of
the switch unit.
Command mode: Global configuration
[no] system service­led operational­enable
Enables (on) or disables (off) the Service Required LED to glow in steady blue
to locate the device.
Command mode: Privileged EXEC
system time <hh>:<mm>:<ss>
Configures the system time using a 24‐hour clock format. The time retains its
value when the switch is rebooted.
Command mode: Global configuration