Lenovo RackSwitch G8264CS Cli Command Reference page 520

520
G8264CS Command Reference for ENOS 8.4
Table 289.
BGP Peering Group Configuration Options (continued)
Command Syntax and Usage
neighbor group <1‐8> redistribute
Configures BGP neighbor group redistribution. To view command options,
see page 523.
Command mode: Router BGP
neighbor group <1‐8> remote­as <AS number (1‐65535)>
[alternate­as <AS number (1‐65535)>]
Adds a remote access server (RAS) into the RAS list. Using the
alternate­as option you can add up to 5 alternate access servers.
Command mode: Router BGP
neighbor group <1‐8> route­map {in|out} <route map ID (1‐64)>
Adds route map into in‐route or out‐route map list.
Command mode: Router BGP
no neighbor group <1‐8> route­map {in|out}
{<route map ID (1‐64)>|all}
Removes route map from in‐route map list.
Command mode: Router BGP
neighbor group <1‐8> route­origination­interval
<min orig time (1‐65535)>
Sets the minimum time between route originations, in seconds.
The default value is 15 seconds.
Command mode: Router BGP
[no] neighbor group <1‐8> route­reflector­client
Enables or disables the group as a route reflector client. Configuring route
reflector clients, implicitly sets up the local router as a route reflector.
Command mode: Router BGP
[no] neighbor group <1‐8> send­community
Enables or disables sending a community attribute to a BGP neighbor group.
Command mode: Router BGP
no neighbor group <1‐8> shutdown
Enables this peering group configuration.
Command mode: Router BGP
neighbor group <1‐8> shutdown
Disables this peering group configuration.
Command mode: Router BGP