Https Access Configuration - Lenovo RackSwitch G8264CS Cli Command Reference

HTTPS Access Configuration
352
G8264CS Command Reference for ENOS 8.4
Table 164.
Strong Password Configuration Options
Command Syntax and Usage
[no] access user strong­password lockout
Enables or disables account lockout after a specified number of failed login
attempts.
The default setting is disabled.
Command mode: Global configuration
access user strong­password warning <1‐365>
Configures the number of days before password expiration, that a warning is
issued to users.
The default value is 15 days.
Command mode: Global configuration
show access user strong­password
Displays the current Strong Password configuration.
Command mode: Privileged EXEC
The following table describes the HTTP Access commands.
Table 165.
HTTPS Access Configuration Options
Command Syntax and Usage
[no] access https enable
Enables or disables BBI access (Web access) using HTTPS.
Command mode: Global configuration
access https generate­certificate
Allows you to generate a certificate to connect to the SSL to be used during the
key exchange. A default certificate is created when HTTPS is enabled for the
first time. The user can create a new certificate defining the information that
they want to be used in the various fields. For example:
Country Name (2 letter code): CA

State or Province Name (full name): Ontario

Locality Name (for example, city): Ottawa

Organization Name (for example, company): Lenovo

Organizational Unit Name (for example, section): Operations

Common Name (for example, user's name): Mr Smith

Email (for example, email address): info@lenovo.com

You will be asked to confirm if you want to generate the certificate. It will take
approximately 30 seconds to generate the certificate. Then the switch will
restart SSL agent.
Command mode: Global configuration