View‐Based Access Control Model Configuration - Lenovo RackSwitch G8264CS Cli Command Reference

View-based Access Control Model Configuration
340
G8264CS Command Reference for ENOS 8.4
The view‐based Access Control Model defines a set of services that an application
can use for checking access rights of the user. Access control is needed when the
user has to process SNMP retrieval or modification request from an SNMP entity.
Table 154.
View‐based Access Control Model Options
Command Syntax and Usage
snmp­server access <1‐32> level {noAuthNoPriv|authNoPriv|
|authPriv}
Defines the minimum level of security required to gain access rights.
noAuthNoPriv means that the SNMP message will be sent without

authentication and without using a privacy protocol.
authNoPriv means that the SNMP message will be sent with

authentication but without using a privacy protocol.
authPriv means that the SNMP message will be sent both with

authentication and using a privacy protocol.
Command mode: Global configuration
snmp­server access <1‐32> name <1‐32 characters>
Defines the name of the group.
Command mode: Global configuration
snmp­server access <1‐32> notify­view <1‐32 characters>
Defines a notify view name that allows you notify access to the MIB view.
Command mode: Global configuration
snmp­server access <1‐32> read­view <1‐32 characters>
Defines a read view name that allows you read access to a particular MIB view.
If the value is empty or if there is no active MIB view having this value then no
access is granted.
Command mode: Global configuration
snmp­server access <1‐32> security {usm|snmpv1|snmpv2}
Allows you to select the security model to be used.
Command mode: Global configuration
snmp­server access <1‐32> write­view <1‐32 characters>
Defines a write view name that allows you write access to the MIB view. If the
value is empty or if there is no active MIB view having this value then no
access is granted.
Command mode: Global configuration