Lenovo RackSwitch G8264CS Cli Command Reference page 537

© Copyright Lenovo 2017
Table 303.
IGMP Querier Configuration Options (continued)
Command Syntax and Usage
no ip igmp querier vlan <VLAN ID (1‐4094)> max­response
Resets the maximum time allowed before responding to a Membership Query
message to its default value of 100.
Command mode: Global configuration
ip igmp querier vlan <VLAN ID (1‐4094)> query­interval <1‐608>
Configures the interval between IGMP Query broadcasts.
The default value is 125 seconds.
Command mode: Global configuration
no ip igmp querier vlan <VLAN ID (1‐4094)> query­interval
Resets the interval between IGMP Query broadcasts to its default value of 125
seconds.
Command mode: Global configuration
ip igmp querier vlan <VLAN ID (1‐4094)> robustness <1‐10>
Configures the IGMP Robustness variable, which is the number of times that
the switch sends each IGMP message.
The default value is 2.
Command mode: Global configuration
no ip igmp querier vlan <VLAN ID (1‐4094)> robustness
Resets the IGMP Robustness variable to its default value of 2.
Command mode: Global configuration
ip igmp querier vlan <VLAN ID (1‐4094)> source­ip <IP address>
Configures the IGMP source IP address for the selected VLAN.
Command mode: Global configuration
no ip igmp querier vlan <VLAN ID (1‐4094)> source­ip
Removes the configured IGMP source IP address for the specified VLAN.
Command mode: Global configuration
ip igmp querier vlan <VLAN ID (1‐4094)> startup­count <1‐10>
Configures the Startup Query Count, which is the number of IGMP Queries
sent out at startup. Each Query is separated by the Startup Query Interval.
The default value is 2.
Command mode: Global configuration
no ip igmp querier vlan <VLAN ID (1‐4094)> startup­count
Resets the Startup Query Count to its default value of 2.
Command mode: Global configuration
Chapter 4: Configuration Commands
537