Lenovo RackSwitch G8264CS Cli Command Reference page 324

324
G8264CS Command Reference for ENOS 8.4
Table 148.
LDAP Server Configuration Options (continued)
Command Syntax and Usage
ldap­server attribute username <1‐128 characters>
Configures a customized LDAP user search attribute.
The default value is uid (unique identification number).
Note: The user attribute needs to be set to cn (common name) if LDAP server
is MS active directory. For example:
cn=John Smith
Command mode: Global configuration
no ldap­server attribute username
Resets the LDAP user search attribute to its default value of uid.
Command mode: Global configuration
no ldap­server attribute
Resets the LDAP attributes to their default values.
Command mode: Global configuration
[no] ldap­server backdoor
Enables or disables the LDAP back door for Telnet, SSH, SCP, HTTP, or HTTPS
access.
The default setting is disabled.
Note: To obtain the LDAP back door password for your G8264CS, contact your
Service and Support line.
Command mode: Global configuration
ldap­server basedn <1‐128 characters>
Configure the Distinguished Name (DN) of the LDAP server. The DN consists
of a sequence of different Relative Distinguished Names (RDN) connected by
commas. An RDN is an attribute that has an associated value in the format
'attribute=value'. For a list of typical RDNs, see page
Enter the full path for your organization. For example:
ou=people,dc=mydomain,dc=com
Note: This option is available only in LDAP enhanced mode.
Command mode: Global configuration
no ldap­server basedn
Deletes the configured DN.
Note: This option is available only in LDAP enhanced mode.
Command mode: Global configuration
329.