406
G8264CS Command Reference for ENOS 8.4
Table 207.
VMAP Configuration Options
Command Syntax and Usage
accesscontrol vmap <1‐128> remark dot1p <0‐7>
Sets the VMAP re‐mark configuration user update priority.
Command mode: Global configuration
no accesscontrol vmap <1‐128> remark dot1p
Disables the use of dot1p for in‐profile traffic VMAP re‐mark configuration.
Command mode: Global configuration
accesscontrol vmap <1‐128> remark {inprofile|outprofile}
dscp <0‐63>
Sets the VMAP re‐mark configuration user update priority for in‐profile or
out‐profile traffic.
Command mode: Global configuration
no accesscontrol vmap <1‐128> remark {inprofile|
|outprofile}
Removes all re‐mark in‐profile or out‐profile settings.
Command mode: Global configuration
no accesscontrol vmap <1‐128> remark inprofile dscp
Disables the use of DSCP for in‐profile traffic.
Command mode: Global configuration
[no] accesscontrol vmap <1‐128> remark usetosprecedence
Enables or disables the use of the TOS precedence for in‐profile traffic.
Command mode: Global configuration
default accesscontrol vmap <1‐128> remark
Resets the VMAP re‐mark parameters to their default values.
Command mode: Global configuration
no accesscontrol vmap <1‐128> remark
Disables re‐marking for the specified VMAP.
Command mode: Global configuration
[no] accesscontrol vmap <1‐128> statistics
Enables or disables statistics for this access control list.
Command mode: Global configuration
accesscontrol vmap <1‐128> tcpudp {sourceport|
|destinationport} <1‐65535> [<port mask (0x0001 ‐ 0xFFFF)>]
Sets the TCP/UDP filtering source port or destination port and port mask for
this ACL.
Command mode: Global configuration