Lenovo RackSwitch G8264CS Cli Command Reference page 116

IGMP Information
116
G8264CS Command Reference for ENOS 8.4
The following commands display IGMP information:
Table 52.
IGMP Multicast Group Information Commands
Command Syntax and Usage
show ip igmp
Displays the current IGMP configuration parameters.
Command mode: All
show ip igmp filtering
Displays current IGMP Filtering parameters.
Command mode: All
show ip igmp groups
Displays information for all multicast groups. For details, see page
Command mode: All
show ip igmp groups address <IP address>
Displays a single IGMP multicast group by its IP address.
Command mode: All
show ip igmp groups detail <IP address>
Displays details about an IGMP multicast group, including source and timer
information.
Command mode: All
show ip igmp groups interface port <port alias or number>
Displays all IGMP multicast groups on a single port.
Command mode: All
show ip igmp groups portchannel <1‐128>
Displays all IGMP multicast groups on a single Link Aggregation Group
(LAG).
Command mode: All
show ip igmp groups vlan <VLAN ID (1‐4094)>
Displays all IGMP multicast groups on a single VLAN.
Command mode: All
show ip igmp ipmcgrp
Displays information for all IPMC groups. For details, see page
Command mode: All
119.
120.