566
G8264CS Command Reference for ENOS 8.4
Table 328.
PIM Interface Configuration Options (continued)
Command Syntax and Usage
ip pim helloholdtime <1‐65535>
Configures the time period in seconds for which a neighbor is to consider this
switch to be operative (up).
The default value is 105 seconds.
Command mode: Interface IP
[default|no] ip pim helloholdtime
Resets the PIM Hello packets hold time to its default value of 105 seconds.
Command mode: Interface IP
ip pim hellointerval <0‐65535>
Configures the time interval, in seconds, between PIM Hello packets.
The default value is 30 seconds.
Command mode: Interface IP
[default|no] ip pim hellointerval
Resets the time interval between PIM Hello packets to its default value of 30
seconds.
Command mode: Interface IP
ip pim joinpruneinterval <0‐65535>
Configures the interval between Join Prune messages, in seconds.
The default value is 60 seconds.
Command mode: Interface IP
[default|no] ip pim joinpruneinterval
Resets the interval between Join Prune messages to its default value of 60
seconds.
Command mode: Interface IP
ip pim landelay <0‐32767>
Configures the LAN delay value for the router interface, in seconds.
Command mode: Interface IP
[default|no] ip pim landelay
Resets the LAN delay for the router interface to its default value.
Command mode: Interface IP
[no] ip pim lanprunedelay
Enables or disables LAN delay advertisements on the interface.
The default setting is disabled.
Command mode: Interface IP