Snmpv3 Group Table Information - Lenovo RackSwitch G8264CS Cli Command Reference

SNMPv3 Group Table Information
SNMPv3 Community Table Information
42
G8264CS Command Reference for ENOS 8.4
A group is a combination of security model and security name that defines the
access rights assigned to all the security names belonging to that group. The group
is identified by a group name.
The following command displays SNMPv3 group information:
show snmp­server v3 group
Command mode: All
All active SNMPv3 groups are listed below:
Sec Model User Name Group Name
­­­­­­­­­­ ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
snmpv1 v1v2only v1v2grp
usm adminmd5 admingrp
usm adminsha admingrp
usm adminshaaes admingrp
Table 13.
SNMPv3 Group Table Information Parameters
Field Description
Sec Model Displays the security model used, which is any one of: USM,
SNMPv1, SNMPv2, and SNMPv3.
User Name Displays the name for the group.
Group Name Displays the access name of the group.
The following command displays the SNMPv3 community table information
stored in the SNMP engine:
show snmp­server v3 community
Command mode: All
Index Name User Name Tag
­­­­­­­­­­ ­­­­­­­­­­ ­­­­­­­­­­­­­­­­­­­­ ­­­­­­­­­­
trap1 public v1v2only v1v2trap
Table 14.
SNMPv3 Community Table Information Parameters
Field Description
Index Displays the unique index value of a row in this table
Name Displays the community string, which represents the configuration.
User Name Displays the User Security Model (USM) user name.
Tag Displays the community tag. This tag specifies a set of transport
endpoints from which a command responder application accepts
management requests and to which a command responder
application sends an SNMP trap.