IGMP Filtering Port Configuration
534
G8264CS Command Reference for ENOS 8.4
The following table describes the commands used to configure a port for IGMP
filtering.
Table 301.
IGMP Filter Port Configuration Options
Command Syntax and Usage
[no] ip igmp filtering
Enables or disables IGMP filtering on this port.
Command mode: Interface port
[no] ip igmp profile <1‐16>
Adds or removes an IGMP filter to this port.
Command mode: Interface port
show interface port <port alias or number> igmpfiltering
Displays the current IGMP filter parameters for this port.
Command mode: All