Rmon Alarm Information - Lenovo RackSwitch G8264CS Cli Command Reference

RMON Alarm Information

© Copyright Lenovo 2017
The following command displays RMON alarm information:
show rmon alarm
Command mode: All
RMON Alarm group configuration:
Index Interval Sample Type rLimit fLimit last value
­­­­­ ­­­­­­­­ ­­­­­­ ­­­­­­­ ­­­­­­­­­­­ ­­­­­­­­­­­ ­­­­­­­­­­
1 1800 abs either 0 0 7822
Index rEvtIdx fEvtIdx OID
­­­­­ ­­­­­­­ ­­­­­­­ ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
1 0 0 1.3.6.1.2.1.2.2.1.10.1
Index Owner
­­­­­ ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
1 dan
The following table describes the RMON Alarm Information parameters.
Table 69.
RMON Alarm Parameter Descriptions
Parameter Description
Index Displays the index number that identifies each alarm instance.
Interval Displays the time interval over which data is sampled and
compared with the rising and falling thresholds.
Sample Displays the method of sampling the selected variable and
calculating the value to be compared against the thresholds, as
follows:
abs — absolute value, the value of the selected variable is

compared directly with the thresholds at the end of the
sampling interval.
delta — delta value, the value of the selected variable at the

last sample is subtracted from the current value, and the
difference compared with the thresholds.
Type Displays the type of alarm, as follows:
falling — alarm is triggered when a falling threshold is

crossed.
rising — alarm is triggered when a rising threshold is

crossed.
either — alarm is triggered when either a rising or falling

threshold is crossed.
rLimit Displays the rising threshold for the sampled statistic.
fLimit Displays the falling threshold for the sampled statistic.
Last value Displays the last sampled value.
Chapter 2: Information Commands
149