ACL IPv6 Configuration
390
G8264CS Command Reference for ENOS 8.4
These commands allow you to define filtering criteria for each IPv6 Access Control
List (ACL).
Table 195.
IPv6 ACL Options
Command Syntax and Usage
accesscontrol list6 <1‐128> action {permit|deny|
|setpriority <0‐7>}
Configures a filter action for packets that match the ACL definitions. You can
choose to permit (pass) or deny (drop) packets or set the 802.1p priority level.
Command mode: Global configuration
accesscontrol list6 <1‐128> egressport port <port alias or number>
Configures the ACL to function on egress packets.
Command mode: Global configuration
no accesscontrol list6 <1‐128> egressport port
Disables the ACL to function on egress packets.
Command mode: Global configuration
[no] accesscontrol list6 <1‐128> log
Enables or disables Access Control List logging.
Command mode: Global configuration
[no] accesscontrol list6 <1‐128> statistics
Enables or disables the statistics collection for the Access Control List.
Command mode: Global configuration
default accesscontrol list6 <1‐128>
Resets the ACL parameters to their default values.
Command mode: Global configuration
show accesscontrol list6 <1‐128>
Displays the current ACL parameters.
Command mode: All